The Ultimate Guide to Bead Weaving Using the Shedding Device

It’s been a long time since I’ve woven a wide bead piece using the Mirrix shedding device. I decided it was time to try this method of bead weaving again and to write a blog post about it since we often get questions about this process. I am always telling people that the set up is more complicated, but the actual weaving of beads using a shedding device is much easier and quicker. I am happy to be reminded after weaving this piece that it really is easier!

I asked myself the following questions: Besides the more complicated set up, are there any drawbacks that would push someone to just skip the shedding device? Was the final product as nice as a product made without using the shedding device? Is it actually faster to weave beads using the shedding device when you are making a wider piece? I have all my pat answers to these questions but felt I needed to re-explore this old territory and to update my opinions. I can happily report that my experience using the shedding device to weave a wide bead piece was absolutely positive. I really can’t imagine weaving a wide bead piece without it. That might be slightly particular to me because I tend to miss sewing through beads when not using the shedding device. That can be corrected even after the piece is off the loom by sewing through the beads correctly off the loom. But that is so annoying. One of the best things about using the shedding device is that it is much more unlikely that you will make any weaving mistakes. I did notice when I took this piece off the loom that there was one place where about ten beads seemed to be floating on the back of the piece. Why? Because I weave beads in sections and that particular section did not go into the shed. Rather it went behind the warp threads. I was able to sew through those beads and correctly attach them to the warp. But on a piece this long one little mistake is not bad. Had I not used the shedding device, there would have been many, many more mistakes. 

Read More

Believe in Yourself (A Mirrix No Warp Ends Project)


I have to say, for me this was a NEW experience!!!  I have used looms before, and this is now my 2nd creation with the Big Sister Loom...but I have never used the No Warp Ends Kit on ANY loom!!  So, for me this was some trial and errors, but mostly just FUN!!

So, off I went!  I designed a pattern, put out the beads and was off to warp! 

Read More

Follow Us!

Subscribe to The Mirrix Looms Blog

Categories

see all
Get Help Choosing a Loom!