A Tall Mini Mirrix

Our customers are the best because they are so creative and are always coming up with new ideas for the Mirrix Loom. One such customer asked if one could use the loom extenders on the Mini Mirrix. My first response inside my head was no way. And then I paused, reconsidered and found a Mini Mirrix and some threaded rod that must have come from a loom I took apart for some research. I do have a pair of regular extenders, but I wanted these to be a little shorter. They were exactly the size I wanted then to be: one foot.

So how does this work? Obviously the Mini Mirrix has no legs. Well that's the point, you aren't going to be standing it up. You will either lay the loom down on a table or prop its bottom in your lap and lean her against a table.

Let me show you how this looks.

Read More

Should You Purchase a Bottom Spring Kit?

What's a Bottom Spring Kit?

A Bottom Spring Kit is a kit that allows you to put a warp coil (spring) on the bottom of your Mirrix Loom, just like you have one on the top. 

What does it do?  

Having a spring on the bottom beam of your loom helps you to keep your warp threads organized while warping and beginning to weave. 

(Image Credit: Susan Murry -left- & Jacqui Johnson -right-)
Read More

Join The American Tapestry Alliance, Save 10% on a Mirrix Loom!

It can be tough to find a Mirrix Loom on sale, but if you join American Tapestry Alliance you'll get a code for 10% off any size Mirrix Loom good for three months after you join AND you get  to benefit from being a part of a wonderful organization dedicated to the art of tapestry weaving.

American Tapestry Alliance offers inspiration, networking, education, discounts  and more. Interested? Click here to learn more about membership!

Read More

Tapestry is Weaving but Weaving Isn't Always Tapestry

You've seeing these adorable woven wall-hangings on Instagram and Pinterest and you're ready to take the plung e to learn how to make your own woven art. Maybe you take a class on a basic frame loom or you make your own loom from a picture frame and follow some instructions you find online. Now, you're ready to take this craft to the next level. What's first? A high-quality loom! You've heard of Mirrix Looms, but they're tapestry looms... is tapestry the type of weaving you're interested in? What exactly IS tapestry?

Tapestry is...
 
Weft-Faced

This means you can see the weft (the threads that go across the loom horizontally) and not the warp. Imagine a piece of woven fabric. You can usually see both the warp (the threads that go around the loom vertically) AND the weft. With tapestry you are actually COVERING the warp threads with the weft.

Read More

A residency at Fibreworks Studio & Gallery

 

Hello!

Last week I did the first 7 days of a summer residency in the yurts of Fibreworks Studio & Gallery in beautiful Madeira Park on the Sunshine Coast of British Columbia. It was the hottest week of the year so I experimented with weaving both inside the yurts where I've got a fan, and outside in the shade. The two spaces were about the same comfortable tempurture so I opted to stay inside on most days since I had the best of both worlds with a skylight above me and the kind of shade that I didn't have to chase all day. I did end up spending plenty of time outside for a natural dye adventure which had me dyeing and overdyeing a single skein of yarn to achieve the perfect yellow, over two days. I ended up dyeing with osage and then overdyeing with fustic to achieve the dark yellow-orange seen in the photos below.

Read More

The Ultimate Guide to Bead Weaving Using the Shedding Device

It’s been a long time since I’ve woven a wide bead piece using the Mirrix shedding device. I decided it was time to try this method of bead weaving again and to write a blog post about it since we often get questions about this process. I am always telling people that the set up is more complicated, but the actual weaving of beads using a shedding device is much easier and quicker. I am happy to be reminded after weaving this piece that it really is easier!

I asked myself the following questions: Besides the more complicated set up, are there any drawbacks that would push someone to just skip the shedding device? Was the final product as nice as a product made without using the shedding device? Is it actually faster to weave beads using the shedding device when you are making a wider piece? I have all my pat answers to these questions but felt I needed to re-explore this old territory and to update my opinions. I can happily report that my experience using the shedding device to weave a wide bead piece was absolutely positive. I really can’t imagine weaving a wide bead piece without it. That might be slightly particular to me because I tend to miss sewing through beads when not using the shedding device. That can be corrected even after the piece is off the loom by sewing through the beads correctly off the loom. But that is so annoying. One of the best things about using the shedding device is that it is much more unlikely that you will make any weaving mistakes. I did notice when I took this piece off the loom that there was one place where about ten beads seemed to be floating on the back of the piece. Why? Because I weave beads in sections and that particular section did not go into the shed. Rather it went behind the warp threads. I was able to sew through those beads and correctly attach them to the warp. But on a piece this long one little mistake is not bad. Had I not used the shedding device, there would have been many, many more mistakes. 

Read More

Follow Us!

Subscribe to The Mirrix Looms Blog

Categories

see all
Get Help Choosing a Loom!