A Mirrix Loom and All It’s Parts
When you get your Mirrix Loom and open the classic brown box, it can feel a little overwhelming if you haven’t used a Mirrix before. What IS all this stuff? Where do I start?
Don’t worry! We have you covered!
Now, depending on which loom you purchased, your loom might come with a variety of things. Below is an image of a loom labeled loom with what your loom might come with. There might be more (looms with the shedding device come with four warp coils, Craftsy looms come with heddles) or less, but this should give you a basic idea of what all the parts are called.
Top Beam: The top beam of every Mirrix Loom is made of aluminum and has rounded edges.
Bottom Beam: The bottom beam of every Mirrix Loom is made of aluminum and has rounded edges. Looms size 28″ and larger have double bottom beams for strength.
Copper Side Bar: Each loom has copper side bars.
Threaded Rod: Threaded rod that fits into the copper side bars allows you to adjust the height of your loom and tighten the tension.
Wing-Nut: Wing-nuts are used to adjust the tension on your warp and the height of your loom.
Warp Coil Tray: This tray (which is not on the Mini Mirrix or Sam Loom) holds your springs/warp coils in place at the top of the loom.
Wooden Clip: Wooden clips (not on the Mini Mirrix or Sam Looms) have two functions: To hold your warping bar when warping and to (optionally) hold the shedding device.
Fold-Out Leg: These legs fold-out to allow your loom to stand steadily on any flat surface. The Mini Mirrix does not have legs, the Lani Loom has one and the rest have two.
Shedding Device: This device raises warp threads to make weaving tapestry or beads faster and easier. It comes standard on all looms 16″ and larger, but does not have to be used. You can learn more about it here.
Shedding Device Handle: This handle operates the shedding device. It can be replaced by an electric treadle if you are weaving tapestry.
Warp Coil: Warp coils (also called springs) space your warp threads. Choose different warp coils depending on the size or thickness of the beads or warp and weft you are using.
Warping Bar: This bar is what your warp gets tied to when warping. It also helps you to ‘advance’ your weaving to the back of the loom for more weaving room. This bar is not used for the “easy warp” method of warping.
Allen Wrench: This wrench loosens and tightens the bars on the shedding device.
Flat Wrench: The flat wrench is helpful for tightening and loosening the wing-nuts.
Want to learn more about Mirrix Looms? Click here to download our free “Weaving is Easy” Ebook