You may have heard the terms “warp coil” and “spring” thrown around our website. Maybe you understand the references, but maybe you don’t. This post is a little primer on warp coils (or springs, they’re the same thing) including HOW TO CHOOSE WHICH WARP COIL TO USE and HOW TO MODIFY A WARP COIL TO FIT YOUR NEEDS. But first… WHAT IS A WARP COIL? A warp coil is a spring you put at the top (or bottom if you have a bottom spring kit) of your loom to organize you warp threads.

warp coil

warp coil

HOW TO CHOOSE WHICH WARP COIL TO USE

How do you know what warp coil to use for bead weaving:

Place the beads you plan on weaving on a needle and measure an inch. Then, count how many beads are in that inch. The number of beads minus one is the warp coil that will be used. For example, if you are using Delicas you would find 19 Delicas are in one inch, so you would use the 18 dent coil. There is some leeway in this, and depending on the beads you are using, it might not work out perfectly (numerically), just close. Using a smaller (lower number) coil is better than using a larger (higher number) coil.

How do I know what warp coil to use for tapestry?

This is something you have to experiment with as a tapestry weaver. For finer weft, you will want to use a warp coil with more dents per inch. For thicker weft, you will want to use a warp coil with fewer dents per inch or even warp every other dent. (For example, an 18 dent warp coil every other dent is equal to a 9 dent warp coil.) The basic thing to remember is to make sure your warps threads aren’t showing and you must consider the warp set (how far apart your warp threads are, or what warp coil you are using), how thick your weft is and how thick your warp is. One way to determine your weft size is to put your weft in between your warp threads vertically when your loom is warped. If your weft threads are much thicker than the space between the two warp threads, then your weft is probably too thick and if your weft threads are much thinner than you know your weft is too thin. HOW TO MODIFY A WARP COIL TO FIT YOUR NEEDS BUY MORE SPRINGS Buy more springs: http://www.mirrixlooms.com/store/warpcoils.html

About these ads

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s