Beaded bracelet instructions: Square bead checkerboard bracelet kit

You will be able to but the kit for this bracelet in a day or two. I’ve made all the kits, just need to get it into our shopping cart. But meanwhile, I am uploading the pattern to this blog for those of you who would like to put together your own kit.

Instructions for Making a Checkerboard Square Bead Bracelet using the Mirrix Loom

Materials Included for making one bracelet:
Matte Patina Iris
Matte Metallic Khaki Iris
Metallic Gold Iris
Two swarovski pearlized crystals
Six grams of Japanese seed beads: Matte Metallic Kahaki Iris
One bobbin of C-lon beading thread
Hand-dyed silk yarn for finishing

Necessary tools not included in the kit:

A Mirrix Loom with or without a shedding device
A piece of cloth for holding beads; a beading needle, a blunt edge needle

Warping your Mirrix Loom:

Warp Coil size: 18 dents (a 14 or 16 dent coil will also work)
Number of warps: 13
Number of rows for 6 ¾ inch bracelet: 99

You can use any of the Mirrix Looms to create this lovely bracelet. This piece can be woven with or without the shedding device. It’s your choice. Try Both!

These instructions are for a bracelet 6 ¼ inches in diameter when on your wrist. Increase or decrease by three rows to add or subtract a quarter inch from the size of your bracelet. Make sure that there are sixrows after the button hole.

You will want to reduce your loom’s height to minimize the amount of warp you will use. If you have a larger Mirrix Loom, this can be accomplished by using the extra warping bar. Use the 18 dent coil for this project if possible. The 14 or 16 dent coils will also be adequate. You will need to have 13 warp threads.

We have included a bead pattern to demonstrate the placement of colors. This pattern does not reflect the actual colors included in this kit. Do follow the placement of color in the pattern.

To Begin Weaving:

Place three piles of the different colored cylinder beads on a cloth in front of your loom.

Cut a length of C-lon thread about a yard long. Tie the end of this thread to the bottom of the left threaded rod on your loom using a slip knot so that you can easily release it and weave it back into your piece later. Beginning with the first row, pick up three blue/green beads, three gold beads, three blue/green beads and three gold beads. Weave these beads. Repeat this pattern for two more rows. The next row will comprise three green beads, three gold beads, three green beads and three gold beads. Repeat for two rows. The next row will comprise three gold beads, three blue/green beads, three gold beads, three blue/green beads. Continue this pattern of for 93 rows for a 6 ¾ inch bracelet. As I mentioned before, add or subtract three bead rows to add or subtract a quarter of an inch to your bracelet. Some adjustment can be accomplished by the placement of your peyote button.

For the next section, keep the new color and replace the old color for nine rows. At row 94, you will need to create a button hole. Continue weaving with your current thread, but only go to column six (please see white line in enclosed pattern). Weave this section of only six columns for six rows. Start a new thread to weave the five columns on the other side of the bracelet. Weave that side for six rows. End one of the threads and continue weaving a straight row of checkerboard for six rows.

Next you need to weave in a header and a footer with the silk thread. Cut the thread in half. Thread a blunt nose tapestry needle. You will be weaving a half inch of this silk on either end of the bracelet. Using the needle, go under and over every other thread (or pairs of threads, if you have used the shedding device), then reverse direction and go under the threads you went over and over the threads you went under. After you have woven a half inch, sew both ends of the silk thread into the woven part so it does not ravel. When you’ve finished weaving your header and footer, loosen the tension on your loom and slip out the warping bar. Lay your piece flat and trim the ends so that you have at least four inches left to work with. Tie overhand knots with warp pairs. When you’ve tied all the knots, trim the warp as close as you can without allowing the knots to be undone. Fold the header (or footer) at the seam where the header and beads meet. Turn the knots under so that they are buried. Carefully sew this header down so that you knots are buried and it looks neat. Do the same with the footer. This will be the back of your bracelet. You want to make this hem as sturdy and neat as possible. Make sure that you avoid covering the button hole.

In order to add a picot edge to the sides of the bracelet, string a workable length of C-lon (a yard) and sew it through the beads at one end of the bracelet in order to firmly attach it. You will pass your needle through the last bead at the edge of the bracelet, pick up three 11/0 seed beads and then pass back through the next edge bead. Pass your needle through the next bead so that you are once again working on the edge of the bracelet. String three more seed bead and pass back through next bead. Continue this way until you have come to the end of the bracelet. If you have left over C-lon, work your way back to the other side of the bracelet and repeat this procedure until you’ve reached the far end. If you have only a short length of C-lon, string a new piece and firmly attach to bracelet. This edging is very attractive as well as reinforcing your bracelet and disguising the warp threads on the side of the bracelet.

The “button” will be created using peyote stitch:

Using cylinder bead color of your choice to make a flat peyote piece that you will sew into a cylinder. Firmly attach the pearls to either end of the tube.

String ten 11/0 seed beads. Make the piece 8 rows wide. Zip the first and last rows together to form a tube. Sew the tail back into the bead work. Use the left over thread to sew to the sixth bead in one of the rows. You will be sewing this button onto the bracelet at a point that creates the best fit for you. String up three 11/0 seed beads, sew onto bracelet, thread three cylinder beads, sew back through button.

Wear and enjoy!

Or, if this is a gift: put it in the included gift bag and give it away!

Mirrix Loom Homepage

Looking Back

Looking Back
 

I haven’t woven (or should I say, finished) a tapestry in a very long time. Inspired by a customer who just ordered the 38 inch weave to embark on tapestry (and bead weaving) after having in her past woven fabric, I decided I needed to look at some of my past tapestry images. So I picked ones that are nolonger with me. You don’t think you are going to miss these pieces when you sell them. You think: wow someone gave me money for that and it’s going to hang on their wall. Isn’t that great! But I miss them.

The one to the right is called “Fragments.

It was woven on a linen warp which was wonderful. The piece came off so rich and stiff and complete. loom it was like drinking a really expensive wine after only drinking cheap stuff for years. Tapestry weaving became magical and not nearly as difficult (this experience must have greatly contributed to creating the Mirrix so that others would have that great tapestry weaving experience without having to buy a huge and expensive floor loom).


These pieces are not shown in order of their creation. This piece was also not woven on the Mirirx.

It lives in a home in Wisconsin. Sold from a show I did there. Interestingly enough, the folks who bought it had me turn it sideways for them to hang (I had to change the bar on the back that I use to hang my tapestries . . . something for a future discussion). I wove a series of tapestries in this style. The diamond pattern was fun to weave and allowed for some surprising progressions.

The tapestry below ended up in the office of the Church that also bought the set of tapestries below.

Light of the World:  These two hang side by side in a Church in Wisconsin.  My first serious commission.  The big challenge was to make sure the image flowed from one  tapestry to the other.

Our pond in Wisconsin (where I lived for four years and where I founded Mirrix.) This was done on a Mirrix Loom. I gave this to my loom company partner at the time right before we headed back to New Hampshire to live. He is no longer my loom company partner but I suspect he still owns this tapestry.

Acorns in a tree to the right.  I don’t know who owns it because it sold through a gallery.  This was a rare realistic piece.  It was based on a tiny photograph I found in a Nature Conservancy magazine.

The tapestry below is called “They worshiped the sun God.”  It came out exactly as I envisioned it.  I use a lot of weft bundles with strands of wool and rayon.

The below tapestry is called Window, I believe.  Again, it sold through a gallery so I don’t know where it now lives.

Night Vision, below, lives a corporate headquarters somewhere in Boston.  I forget the name!

Color Impressions

Color Impressions (originally published in Spin-Off Magazine)

I began weaving tapestry with commercially dyed and spun yarn. In order to make the yarns ”sing” I combined various weights and types of yarns together using the method known to tapestry weavers as weft blending. Eventually, I learned how to dye these yarns, giving me even more control over the final product. Still, a certain inner glow was missing from my tapestries.
I wasn’t able to define what was absent until a student showed up to my class with a tapestry woven from her own color-blended, handspun yarns. I was astounded by the muted, watercolor-like glow that emanated from her first tapestry. I had always said I would never learn to spin. In that moment I knew the choice was not mine to make.
The next day I was the owner of a spinning wheel and a couple of pounds of Merino roving from a friend’s sheep. In the first week I learned two things: how to spin a yarn that was acceptable and why all fleeces are not the same. I knew I wasn’t spinning the right fleece for tapestry weaving but I had no idea what type of fleece was right. I asked a lot of questions before I understood which fleeces are appropriate for tapestry, how those fleeces should be prepared, and how to blend the dyed fibers for spinning. Since becoming a bonafied spinner I have discovered that the journey from fleece to yarn is as integral to the tapestries as the weaving itself.

I have decided that certain long wools work best for my tapestries. I prefer Cotswold, but also enjoy Wendslydale and Lincoln. I usually blend these wools with mohair and sometimes little bits of Angelina fiber, which is a totally synthetic fiber that comes in a variety of colors and reflects light in a great imitation of nature. I both comb and drum card my fiber, depending on how well I want to blend the colors since there is a minimum of two colors of fleece in every yarn I spin. I use combs when I want each fiber color to be equally blended throughout the yarn creating a more uniform color appearance and the illusion of a solid color. The drum carder is useful when one wants a more uneven distribution of color and a more variegated looking yarn.

The best method for becoming comfortable with color blending is to practice with small amounts of colored fleece just using hand combs or cards or even you fingers. Start with closely related colors and then throw in a color from the other side of the color wheel. Because the fiber colors do not bleed together like paint, your chances of coming out with mud are non-existent. Gradually add colors, being mindful simply of whether or not the results look good. You can often correct a bad color choice by adding a neutralizing color from the other side of the color wheel. Break out of your familiar color traps by combining three colors that you think will look hideous together. You will find that often the results are better than anything you could have planned. The goal is to experiment with tiny quantities of fiber until you have created a bunch of sample blends. Spin it all up and see what worked and what did not. The final test is weaving this yarn because even an apparently ugly yarn can work beautifully in small quantities in a tapestry. The gift is that as a spinner you can mix your own paints, exerting complete control over the colors in your weaving.

Tricks are great for becoming comfortable working with color, but learning how to see the colors that exist all around us is imperative. Nature is the single best source for this knowledge. Not only does nature provide a perfect assortment of color combinations, but she also showers these colors with an ever changing light show. Matisse used to paint the same scene again and again as the light changed. The colors in each of the paintings from a series are radically different from one another. The experiment is easy to do. Find a patch of nature that appeals to you and watch it for an extended period of time and at different times. Randomly choose to really look at color combinations in nature. Why does that bright red flower look great against the kelly green spring grass? I was always told that yellow greens and blue greens don’t go well together and yet nature is a riot of such green combinations.

I recently received feedback from a student during the last class of a tapestry and bead weaving workshop. She had just returned from a trip to the Bahamas. She was determined to look at the colors of nature while on this trip to inspire the final project for the class. She choose the moment of sunset to watch the colors change above and across the water. She watched it intently every day for a week. When she showed me her final weaving I was stunned. The little flecks of orange and red and yellow and green exploding in a literal sea of blue shading into a lighter blue brought me right to that beach at sunset. There was no sun in her piece. There was just the magic of color that the sun shakes off into the sky and water right before it leaves. It’s a magic all of us are capable of both seeing and recreating.

www.mirrixlooms.com